End Cap for U Channel
To add to cart, choose from the options below.
To glue
End caps for u channel moldings to be installed using silicone.
| Product # | Finish | Height |
|---|---|---|
| HREC1X1PS | Polished Stainless Steel | 25.4 mm* |
| HREC1X1SC | Satin Chrome | 25.4 mm* |
| HREC1X112SC | Satin Chrome | 38.1 mm* |
| HREC1X2SC | Satin Chrome | 51 mm* |
| HREC1X1BS | Stainless Steel | 25.4 mm* |
| HREC1X112BS | Stainless Steel | 38.1 mm* |
| HREC1X2BS | Stainless Steel | 51 mm* |
ADVANTAGES AND BENEFITS
Simply glue them with silicone-based sealant
REQUIRED PRODUCTS
Requires the following products
TECHNICAL SPECIFICATIONS
Thickness
1 mm
Width
25.4 mm*
Material
Stainless Steel 304
Glass Drilling
Not Required
Recommended Location Usage
Interior
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
Always set the product in a suitable material.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job.
The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job.
The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel.
DISCLAIMER
The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
