North American SDS
Dressing Stone for Diamond Drill
To add to cart, choose from the options below.
120 grit
The dressing stone is a white aluminum oxide compound. (Only production bits can be dressed - Impreganted diamond)
Product # | Width |
---|---|
GTDDSTONE821 | 2 in |
GTDDSTONE861 | 6 in |
ADVANTAGES AND BENEFITS
This dressing stone removes waste particles and creates a new cutting edge.
APPLICATION
Dressing Procedure:
1. Soak dressing stick or block in coolant.
2. Turn off coolant supply to diamond tool.
3. Turn on diamond tool and allow to reach full-speed.
4. Turn off diamond tool.
5. Apply dressing stick to coasting diamond tool or in the case of core drills, lower bit into dressing block with enough pressure to slowly bring to a complete stop.
6. Repeat if necessary.
1. Soak dressing stick or block in coolant.
2. Turn off coolant supply to diamond tool.
3. Turn on diamond tool and allow to reach full-speed.
4. Turn off diamond tool.
5. Apply dressing stick to coasting diamond tool or in the case of core drills, lower bit into dressing block with enough pressure to slowly bring to a complete stop.
6. Repeat if necessary.