Phoenix Wall Mounted Single Sliding Door Set

Product # RGSD6WMSP170
Set

To assemble a glass door on a wall surface

Stainless steel hardware set to install a sliding glass door on a wall surface (glass not included).

Increased security!
- The ball bearing rollers are equipped with anti-lift mechanisms to prevent the door from lifting off of the track.
- With the six wall mount clamps securely fastened to the wall, the door remains stable during handling.
- The addition of two floor mounted door stops, together with the left and right track stops ensure no recoil if the door is moved suddenly.

All packaged together and delivered to you in one single box, making you sure nothing is forgotten.
All you have to do is select one of our handles!
Manufacturing Material: Stainless Steel: 316 Finish: Brushed Modify Options
Product # Manufacturing Material Finish
RGSD6WMSP170 Stainless Steel: 316 Brushed
RGSD4WMSP900 Stainless Steel: 304 Matte

TECHNICAL SPECIFICATIONS

Product #
RGSD6WMSP170
Door Material
Glass
Load Capacity
Max. 100 kg
Application
Standard Access Door, Barn Door
Brand
Richelieu Glazing Supplies
Overall Length
2.65 m
Glass Thickness
10 to 12 mm

SUGGESTED PRODUCTS

  • Mounting Accessories
  • Recessed and Flush Cup Pulls for Sliding Doors

INCLUDED PRODUCT(S)

2650 mm long track
6 wall mounted clamps
2 rollers
Left and right side door stops
Floor guide
2 floor mounted door stops

*For a complete list of included parts please refer to the installation manual

APPLICATION

The Phoenix hardware sets combine a sleek and simple look with easy functionality.
Perfect for use in smaller spaces to avoid swinging doors and bulky hinges.

IMPORTANT INFORMATION

Use safety glass!
The glass must be shaped according to the section plane provided in the box.

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. Always follow the instructions inside the package. The manufacturer reserves the right to change product and information without notice.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.

The Company disclaims any responsibility for the structural details related to a construction or project.

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.

The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.

Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.