Line art
BALUGA Trolley Hanger Set
To add to cart, choose from the options below.
Anti-lift
The BALUGA trolley hanger set for one glass panel 3/8" to 1/2" (10 to 12.7 mm) thick with a maximum weight capacity of 220 lbs (100 kg). Smooth-rolling nylon wheels with ball bearings with anti-lift device. Hangers are stainless steel AISI304 and available in a satin or polished finish.
An ideal solution for residential and commercial applications.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Glass requires drilling for through-bolt fasteners, refer to instructions for dimensions.
An ideal solution for residential and commercial applications.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Glass requires drilling for through-bolt fasteners, refer to instructions for dimensions.
| Product # | Finish |
|---|---|
| 8911000253171 | Polished Stainless Steel (171) |
| 8911000016177 | Satin Stainless Steel (170) |
ADVANTAGES AND BENEFITS
- For 3/8 in to 1/2 in thick glass
- Ball bearing wheels
- AISI304 Stainless Steel
- Ball bearing wheels
- AISI304 Stainless Steel
TECHNICAL SPECIFICATIONS
Door Movement
Straight Sliding
Roller Position
Upper
Door Installation
Top Hung
Packaging Format
Box
Compatible with
Baluga
Style
Contemporary
Load Capacity
80 to 220 lb
Product type
Hardware Set
Number of Doors
1
Door Width
24 to 44 in
Door Thickness
3/8 to 1/2 in
Door Height
36 to 120 in
Soft-Closing
No
Application
Barn Door
SUGGESTED PRODUCTS
- Running and Guiding Tracks for Sliding Door Systems
- Stoppers and Soft-Close Mechanisms
IMPORTANT INFORMATION
Use metric dimensions for greater accuracy during installation.
Please read the entirety of the installation manual before proceeding with installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Ensure that each roller assembly is straight and tight. Also check all spanner nuts and tighten if necessary. Do not overtighten. Glass fracture could occur.
Please read the entirety of the installation manual before proceeding with installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Ensure that each roller assembly is straight and tight. Also check all spanner nuts and tighten if necessary. Do not overtighten. Glass fracture could occur.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
