Line art
Mini Post with Two Stand-off Fitting and Level Adjustment Screws
Product # 706SP0562205170
Marine Grade Material
Designed to be used as a minipost for a handrail, this system supports glass panels.
Made with marine grade 2205 stainless steel, it offers the best corrosion resistance for use in a variety of outdoor projects.
These clamps are designed for surface installation of glass panels inside and outside around terraces and pools
Made with marine grade 2205 stainless steel, it offers the best corrosion resistance for use in a variety of outdoor projects.
These clamps are designed for surface installation of glass panels inside and outside around terraces and pools
ADVANTAGES AND BENEFITS
Can be attached to different substrates using the right anchors.
Suitable for several thicknesses of glass.
Excellent resistance to corrosion.
Suitable for several thicknesses of glass.
Excellent resistance to corrosion.
TECHNICAL SPECIFICATIONS
Product #
706SP0562205170
Type of Mounting
Floor Mount
Safety Glass Thickness
15/32 in*
Finish
Stainless Steel
Thickness
1 31/32 in*
Mounting Side
Reversible
Height
11 3/8 in*
Width
4 11/32 in*
Length
3 11/32 in*
Material
Stainless Steel: Duplex 2205
Glass Drilling
Not Required
Recommended Location Usage
Interior, Exterior, Coastal
Load Capacity for Two Brackets
Max. 159 lb*
Panel Height
Max. 47 1/4 in*
Panel Width
Max. 78 3/4 in*
Milling C/C
5 1/2 in*
Milling Diameter
7/16 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
This system is used in several applications such as the perimeter of a terrace, balcony railing, as well as the wind screen around a swimming pool.
IMPORTANT INFORMATION
Glass drilling required for use.
Install the baluster minipost directly to the substrate, then install the trim at its base to hide the mounting screws
Install the spacer bases to the post, then insert the glass and finish the installation with the spacer caps
Install the baluster minipost directly to the substrate, then install the trim at its base to hide the mounting screws
Install the spacer bases to the post, then insert the glass and finish the installation with the spacer caps
DISCLAIMER
For safety purposes, use tempered glass.
The use of power tools during installation may damage the hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice.
Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.
The use of power tools during installation may damage the hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice.
Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.