Technical Datasheet
Small Joint Sealer
Product # SAJS5504C5
Narrow Joint Seam Sealers Certified (AAMA 803.3)
One-component, controlled flow, solvent release sealant designed to seal mechanically fixed joints. After solvent release, this sealant exhibits a tough ductile mass that fulfills the sealant requirements of recreational vehicles, window manufacturing, cargo trailers and manufactured home sealant details.
Product # | Volume |
---|---|
SAJS5504C5 | 5 gal. |
SAJS5504C | 10.1 oz |
ADVANTAGES AND BENEFITS
- Excellent adhesion
- Outstanding UV resistance
- Non-yellowing
- Easy to apply
- Fast skinning
- Cures to a ductile consistency
- Permanently flexible
- Paintable
- Mildew resistant
- Primerless adhesion to substrates, including anodized and mil finish aluminum, steel, galvanized steel, fiberglass, many plastics and rubber roofs.
- Outstanding UV resistance
- Non-yellowing
- Easy to apply
- Fast skinning
- Cures to a ductile consistency
- Permanently flexible
- Paintable
- Mildew resistant
- Primerless adhesion to substrates, including anodized and mil finish aluminum, steel, galvanized steel, fiberglass, many plastics and rubber roofs.
TECHNICAL SPECIFICATIONS
Product #
SAJS5504C5
Finish
Clear
Product Type
Sealant
Ideal Use
Aluminum Windows, Wood Windows, Vinyl (PVC) Windows, Gutter, Outside
Optimal adherence to
Plastic, Rubber, Aluminum, Steel, Galvanized steel
Properties
Paintable
APPLICATION
- Narrow corner joints and screw heads
- Waterproofing rivet seams and roof nails
- Sealing gutters
- Sealing vehicle bodies, cab construction, underbody compartments and roofing
- Sealing front and rear spoilers, auto trim, moldings, body seams and weld joints
- Sealing corner moldings, fabricated roof-lap seams, bumper assemblies and body-to-cab joints in minimotor homes.
- Waterproofing rivet seams and roof nails
- Sealing gutters
- Sealing vehicle bodies, cab construction, underbody compartments and roofing
- Sealing front and rear spoilers, auto trim, moldings, body seams and weld joints
- Sealing corner moldings, fabricated roof-lap seams, bumper assemblies and body-to-cab joints in minimotor homes.
IMPORTANT INFORMATION
APPLICATION LIMITATIONS
Not recommended for use:
- On frost-bearing surfaces or when the temperature is below 40°F (4.6°C)
- On joints that will be subjected to continuous water immersion
- Joints contaminated with silicone-type cutting or fabricating oils
- As a sealant on polycarbonate or acrylic surfaces when in tension
- On polystyrene or foam insulation
- Dynamic expansion joints.
Not recommended for use:
- On frost-bearing surfaces or when the temperature is below 40°F (4.6°C)
- On joints that will be subjected to continuous water immersion
- Joints contaminated with silicone-type cutting or fabricating oils
- As a sealant on polycarbonate or acrylic surfaces when in tension
- On polystyrene or foam insulation
- Dynamic expansion joints.