T5E Instructions
Escutcheon Lever Trim for 536/548 Series
Product # T5E10AL
- Thrubolted design, clutch freewheeling, non-handed and reversible.
- Fits and covers 2-1/8" 161 standard cutout hole.
- Fits and covers 2-1/8" 161 standard cutout hole.
TECHNICAL SPECIFICATIONS
Product #
T5E10AL
Door Thickness
1 3/4 in
Height
81 mm
Grade
1
Color/Finish
Satin Aluminum
Standards and Certifications
ANSI
Backset
2 3/4 in
Handing Position / Opening Side
Reversible for Left or Right
Finish Warranty
5 Years
Mechanical Warranty
10 Years
Mounting Hardware
Included
Mounting Height
405 mm
Dogging
1/4 in
Latchbolt Throw
3/4 in
Deadbolt Throw
1/2 in
Width
2 5/16 in
Length
8 1/2 in
Projection
2 1/2 in
Door Width Requirements
36 in
IMPORTANT INFORMATION
DEFINITIONS
Passage: Used on doors that don't require a locking mechanism.
Entrance: Typically used on exterior doors which can be locked/unlocked.
Storeroom: Used when the outside lever needs to be locked at all times. The door can only be opened from the outside using a key. There is no lock/unlock on the inside of the door.
Passage: Used on doors that don't require a locking mechanism.
Entrance: Typically used on exterior doors which can be locked/unlocked.
Storeroom: Used when the outside lever needs to be locked at all times. The door can only be opened from the outside using a key. There is no lock/unlock on the inside of the door.
