Window Snubbers With and Without Insert
To add to cart, choose from the options below.
Prevents bowing of large windows
Truth Snubbers prevent bowing of tall casement windows or wide awning windows and have been found to improve the seals of the bottom and top rails of double-hung windows in the closed position.
Some models feature a PVC insert for use on aluminum-clad units, which reduces wear on the finish of the cladding.
A Concealed Snubber which fits between the sash and frame of the Truth 14 Series hinge cavity is also available
This hardware is not visible from the exterior of the window.
Suitable for use with concealed or exposed hinges.
Some models feature a PVC insert for use on aluminum-clad units, which reduces wear on the finish of the cladding.
A Concealed Snubber which fits between the sash and frame of the Truth 14 Series hinge cavity is also available
This hardware is not visible from the exterior of the window.
Suitable for use with concealed or exposed hinges.
| Product # | C-C | Features | Finish | Length | Width | Height |
|---|---|---|---|---|---|---|
| TH1039032 | 1 in | PVC Insert | White | 1 1/2 in | 5/8 in | 3/4 in |
| TH2011832 | 1 in | Without Insert | White | 1 1/2 in | 0.625 in | 0.565 in |
| TH2299992 | 1.34 in | Concealed Snubber | Off White | 1.84 in | 0.5 in | 0.37 in |
ADVANTAGES AND BENEFITS
Snubbers are designed for use on sash and frame sections at points of high deflection to maintain positive seal contact when high negative air pressures are encountered.
Constructed of plated steel or stainless steel with a PVC insert where required by profile material.
Constructed of plated steel or stainless steel with a PVC insert where required by profile material.
TECHNICAL SPECIFICATIONS
Type
Awning Window, Casement Window
Collection
Window Hardware
Brand
AmesburyTruth, Truth
Mounting
Sill
Material
Stainless Steel
Side
Interchangeable
IMPORTANT INFORMATION
1. Snubbers are recommended for use at the center of the hinge side of any casement window which has a tendency to bow outward at the middle when in the closed position.
2. Adding a Snubber may increase the negative air pressure rating of a casement, awning or double hung window.
3. If the sash has a cladded exterior and requires a Snubber, then a Snubber with a PVC insert should be used to prevent marring.
4. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended.
5. For vinyl window applications, mounting screws should pass through two PVC walls, or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended.
6. When selecting mounting screws for this hardware, coating compatibility is one of the most important criteria. For best corrosion resistance the coating on the screws should be the same as the coating on the hardware.
7. For metal window profiles Richelieu recommends machine screws. However, in most applications sheet metal screws will provide adequate holding power.
2. Adding a Snubber may increase the negative air pressure rating of a casement, awning or double hung window.
3. If the sash has a cladded exterior and requires a Snubber, then a Snubber with a PVC insert should be used to prevent marring.
4. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended.
5. For vinyl window applications, mounting screws should pass through two PVC walls, or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended.
6. When selecting mounting screws for this hardware, coating compatibility is one of the most important criteria. For best corrosion resistance the coating on the screws should be the same as the coating on the hardware.
7. For metal window profiles Richelieu recommends machine screws. However, in most applications sheet metal screws will provide adequate holding power.
