Square Glass Clamp with One Closed Side, with Lock Pin for Flat Mounting

To buy, choose from the options below.
Safety Glass Thickness: 10 mm 10 to 12 mm Packaging format: Box Per unit Select Options

Description

Closed side

Solid stainless steel glass clamp designed for the railing and glass industry. These clamps have a flat base for surface mounting.

Glass drilling is required when using the lock pin.

TECHNICAL SPECIFICATIONS

Height
55 mm
Length
55 mm
Manufacturing Material
Stainless Steel: 316
Color/Finish
Stainless Steel
Thickness
35 mm
Type of Mounting
Square Post-Tube
Recommended Location Usage
Interior, Exterior
Balustrade Post Type
Square Tube
Milling Diameter
8.5 mm

SUGGESTED PRODUCTS

  • Square Handrail and Baluster Post
  • Accessories for Glass Balusters Clamps
  • Allen Keys

ADVANTAGES AND BENEFITS

Exceptional increase in stability and safety to prevent the collapse of the glass when used with lock pin and end plate. The end plate serves to protect against the collapse of the glass after installation, even if used without the lock pin. Ideal for designing railings and glass balustrades with handrails.

APPLICATION

This product accepts M8 screws or equivalent.

INCLUDED PRODUCT(S)

Safety lock pin and end plate included

RELATED DOCUMENTS

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Square Glass Clamp with One Closed Side, with Lock Pin for Flat Mounting

To buy, choose from the options.