Standoff Cap Wrench

Product # GMSOT1

Tightening wrench for standoff cap

Metal wrench designed to tighten standoff caps in order to hold glass panels in place. Simply use the proper end of the tool to affix the cap with precision to the piece. The staple-shaped end of the wrench attaches to the opening inside the standoff cap.

ADVANTAGES AND BENEFITS

The interior rods on each side of the tool allow to tighten the standoff cap in order to hold the glass panel in place. Its design allows for a good grip in terms of the handle.
Suitable for various standoff diameters.

TECHNICAL SPECIFICATIONS

Product #
GMSOT1
Diameter
3/4 to 1 1/4 in
Type of Tool
Manual
Production material
Zinc

APPLICATION

Tool designed for lateral glass sign applications or furniture assembly with a glass top

IMPORTANT INFORMATION

Select a tool according to the standoff diameter. Tool is suitable for a standoff cap of 19 mm to 32 mm (3/4" to 1-1/4") or from 38 mm to 50 mm (1/2" to 2") in diameter.

This illustration is provided for visual reference only. Actual product may vary.

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.

The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.

Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.

RELATED DOCUMENTS