Technical data sheet
Assembly sealing compound
Product # SA4572
PVC repair
Is used by specialised companies for a quick constructional bonding of PVC-hard-materials in the window manufacturing to bond additional profiles like weather-boarding, water bars, blind components, etc., and also to bond cover caps, drainage, protection stripes for shutters into PVC-profiles. Is offers a wide adhesion spectrum on different materials, PVC-hard, powdercoated aluminium, stone, concrete, wood, etc.
ADVANTAGES AND BENEFITS
-Possesses long-lasting, non-aging, tough elastic film properties as well as a good weathering resistance and UV-stability.
-Can be used for joint sealing up to 7 mm.
-Thixotrope (does not drop)
-Wide range of application possibilities to different plastic materials
-Can be used for joint sealing up to 7 mm.
-Thixotrope (does not drop)
-Wide range of application possibilities to different plastic materials
TECHNICAL SPECIFICATIONS
Product #
SA4572
Weight
305 g
Finish/Color
White
Viscosity
Average paste consistency
Material
PVC
Drying time (approx.)
24 hours
Open time (approx.)
from 45 to 60 seconds
IMPORTANT INFORMATION
-Density as per EN 542 at +20 °C (+68 °F) approx. 1.01 g/cm3 (8.43 lb/gal)
-Functional strength for bonding of stress-free battens approx. 8-10 min
-Functional strength for bonding of stress-free battens approx. 8-10 min
APPLICATION
-The adhesive is applied on one side of the bonding surfaces as a bead (coiled).
-Applied quantity for bonding of battens
20 mm (0.79") wide bonding surface approx. 8 g/running metre (0.28 oz/running meter)
40 mm (1.57") wide bonding surface approx. 16 g/running metre (0.56 oz/running meter)
-Minimum processing temperature from +10 °C (+50 °F)
-For sealing joints, the mass is applied with an obliquely-cut tip end and then it hardens fully, in this case, the joint is usually not smoothed - it shrinks to ~50% until it is cured.
-Applied quantity for bonding of battens
20 mm (0.79") wide bonding surface approx. 8 g/running metre (0.28 oz/running meter)
40 mm (1.57") wide bonding surface approx. 16 g/running metre (0.56 oz/running meter)
-Minimum processing temperature from +10 °C (+50 °F)
-For sealing joints, the mass is applied with an obliquely-cut tip end and then it hardens fully, in this case, the joint is usually not smoothed - it shrinks to ~50% until it is cured.