Outside Corner Mall Front Clamp, 135° angle
To add to cart, choose from the options below.
Length: 60 mm
Clamp commonly used in malls for joining vertical glass wall panels.
This clamp adds stiffness so as to limit the bending caused by the application of pressure.
It can also be used as floating indicators to alert pedestrians of the panel's presence in poorly lit areas.
This clamp adds stiffness so as to limit the bending caused by the application of pressure.
It can also be used as floating indicators to alert pedestrians of the panel's presence in poorly lit areas.
| Product # | Finish |
|---|---|
| GC135SQ316PS | Bright Polished Chrome |
| GC135SQ316SS | Brushed Stainless Steel |
ADVANTAGES AND BENEFITS
Connects two glass panels in a vertical position to create a 135° angle.
No glass shaping required for use.
Simply affix the clamps with a glass adhesive.
No glass shaping required for use.
Simply affix the clamps with a glass adhesive.
TECHNICAL SPECIFICATIONS
Glass Thickness
10 to 12 mm
Material
Stainless Steel: 316
Length
60 in
Width
60 mm
Thickness
4.7 mm
Height
51 mm
IMPORTANT INFORMATION
This clamp does not require any fabrication. It simply attaches with VHB tape, Triolyse or heavy-duty construction silicone. Clamp has no fasteners. Front and rear plates are affixed to panels.
For safety purposes, use tempered glass. Make sure that the product is properly installed using suitable fixtures on the support material.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must always be done by qualified personnel.
For safety purposes, use tempered glass. Make sure that the product is properly installed using suitable fixtures on the support material.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must always be done by qualified personnel.
DISCLAIMER
The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
