Square Clamp for Glass Mall Front
To add to cart, choose from the options below.
2" x 2" (50.8 mm x 50.8 mm)
Glass clamp commonly used to join vertical glass panels in shopping mall applications.
They can also serve as floating indicators to alert pedestrians of a panel's presence in dimly lit areas.
Features two screws rather than one single clamping screw, providing more stability.
They can also serve as floating indicators to alert pedestrians of a panel's presence in dimly lit areas.
Features two screws rather than one single clamping screw, providing more stability.
| Product # | Finish |
|---|---|
| GC180SQ316PS | Bright Polished Chrome |
| GC180SQ316SS | Brushed Stainless Steel |
ADVANTAGES AND BENEFITS
Connects two vertical glass panels in order to create a continuous line.
Simply install the clamps with the required screws according to glass thickness.
Glass fabrication required.
Suitable for various glass thicknesses.
Simply install the clamps with the required screws according to glass thickness.
Glass fabrication required.
Suitable for various glass thicknesses.
TECHNICAL SPECIFICATIONS
Glass Thickness
8 to 12 mm
Material
Stainless Steel: 316
Length
51 mm
Thickness
6 mm
Height
51 mm
IMPORTANT INFORMATION
Suggested minimum gap between tempered glass panels: 7/32" (5.6 mm).
For safety purposes, use tempered glass.
The glass must be shaped according to the section plane provided in the box.
Make sure that the product is properly installed using suitable fixtures on the support material.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must always be done by qualified personnel.
For safety purposes, use tempered glass.
The glass must be shaped according to the section plane provided in the box.
Make sure that the product is properly installed using suitable fixtures on the support material.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must always be done by qualified personnel.
DISCLAIMER
The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
