Line art
Low Profile Top Rail Wall Base
Product # SSUTCH109
Mounting on wall and for 25 mm rail
Allows a pure angle design.
Install the base on the wall and simply insert the square handrail inside the base.
The use of glue helps to stabilize and secure the base.
Install the base on the wall and simply insert the square handrail inside the base.
The use of glue helps to stabilize and secure the base.
REQUIRED PRODUCTS
Requires the following products
AND
TECHNICAL SPECIFICATIONS
Product #
SSUTCH109
Type of Mounting
Wall Mount
Handrail Type
Flat Tubing
Finish
Satin Stainless Steel
Recommended Location Usage
Interior, Exterior, Coastal
Material
Stainless Steel: Duplex 2205
Handrail Size
25 mm x 21 mm (31/32" x 13/16")
Category
Top Rail Wall Bases
Thread Type
M6
IMPORTANT INFORMATION
Always make sure that the product is properly installed in the support material using suitable fixtures.
Never exceed the maximum load or size recommended by the manufacturer.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed in the support material using suitable fixtures.
Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product.
Never exceed the maximum load or size recommended by the manufacturer.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed in the support material using suitable fixtures.
Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product.
DISCLAIMER
The above information, as well as any written or verbal technical advice, whether or not based on tests, is provided to the best of our knowledge. These tips are not binding, and it is your responsibility to personally verify their accuracy. It is also your responsibility to check the suitability of the product for the intended purpose.
The application, use and processing of our products, as well as projects carried out following our technical advice, are beyond our control and are your sole responsibility.
The sale of our products is subject to the general conditions of sale and delivery in force. Take note that Richelieu will refuse any return or claim for an unpackaged product.
The application, use and processing of our products, as well as projects carried out following our technical advice, are beyond our control and are your sole responsibility.
The sale of our products is subject to the general conditions of sale and delivery in force. Take note that Richelieu will refuse any return or claim for an unpackaged product.
