Line art
Round Glass Clamp - Flat Post Mount - Model 507
To add to cart, choose from the options below.
40.5 mm height with detachable safety lock pin
Set of four round clamps for installation of a glass panel between two square posts.
The optional safety lock pin is included to keep the glass in place and prevent the glass from sliding.
A set of protective joints, sold separately, is required for installation.
The optional safety lock pin is included to keep the glass in place and prevent the glass from sliding.
A set of protective joints, sold separately, is required for installation.
Product # | Recommended Location Usage | Material |
---|---|---|
HRGCS450700170 | Interior | Stainless Steel 304 |
HRGCS650700170 | Interior / Exterior | Stainless Steel 316 |
ADVANTAGES AND BENEFITS
Increases glass stability when used with safety lock pin.
REQUIRED PRODUCTS
Requires ONE of the following products
OR
Set of Protective Joints for Round Glass Clamps
- Safety Glass Thickness: 10 mm
Box of 4
TECHNICAL SPECIFICATIONS
Type of Mounting
Wall Mount, Post Mount
Finish
Stainless Steel
Glass Drilling
Not Required
Safety Glass Thickness
6 to 10 mm
Height
40.5 mm
Width
26.2 mm
Length
50 mm
Baluster Post Type
Square Tube
Milling Diameter
10 mm
INCLUDED PRODUCT(S)
Set of four round clamps.
Stainless steel safety lock pin covered in rubber.
M8 mounting screws.
Screw cap.
Stainless steel safety lock pin covered in rubber.
M8 mounting screws.
Screw cap.
IMPORTANT INFORMATION
Glass drilling is required when using the safety lock pin. Not using the safety lock pin during installation may result in the glass sliding.
Make sure to use proper joints according to the glass thickness.
For safety purposes, use tempered glass.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material.
Make sure to use proper joints according to the glass thickness.
For safety purposes, use tempered glass.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material.
DISCLAIMER
The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.