Standard Top Mount Spigot - 10"
Product # SSSPIGOT10S
Vertical adjustment
The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.
Allows height adjustment of the glass up to a maximum of 1/4" (6 mm)
Allows height adjustment of the glass up to a maximum of 1/4" (6 mm)
| Product # | Finish |
|---|---|
| SSSPIGOT10S | Satin Stainless Steel |
| SSSPIGOT10B | Satin Black |
ADVANTAGES AND BENEFITS
Creates an elegant clamp look with the trim plate as a cover for the base and screws.
No glass milling or fabrication required.
No glass milling or fabrication required.
TECHNICAL SPECIFICATIONS
Product #
SSSPIGOT10S
Safety Glass Thickness
12 to 17.52 mm
Height
254 mm
Material
Stainless Steel: Duplex 2205
Glass Drilling
Not Required
Width
128 mm
Length
128 mm
IMPORTANT INFORMATION
For safety purposes, use tempered glass.
Not designed for guardrail applications.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
Not designed for guardrail applications.
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
DISCLAIMER
The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
