Offset Back-to-Back Round Ladder Handle with Round Mounting Rods
To add to cart, choose from the options below.
For commercial applications
Product # | Center to Center Drilling (Spacing) | Diameter | Door Type | Door Thickness | Height | Projection |
---|---|---|---|---|---|---|
CDLADDER24OSBS | 12 in | 1 1/4 in | Glass | 24 in | 3 5/16 in | |
705241232OS170 | 12 in | 32 mm | Glass / Wood / Architectural | 35 to 55 mm | 24 in | 85 mm |
705362432OS170 | 24 in | 32 mm | Glass / Wood / Architectural | 35 to 55 mm | 36 in | 85 mm |
CDLADDER48OSBS | 36 in | 1 1/4 in | Glass | 48 in | 3 5/16 in | |
705483632OS170 | 36 in | 32 mm | Glass / Wood / Architectural | 35 to 55 mm | 48 in | 85 mm |
705604832OS170 | 48 in | 32 mm | Glass / Wood / Architectural | 35 to 55 mm | 60 in | 85 mm |
CDLADDER72OSBS | 60 in | 1 1/4 in | Glass | 72 in | 3 5/16 in | |
705726032OS170 | 60 in | 32 mm | Glass / Wood / Architectural | 35 to 55 mm | 72 in | 85 mm |
TECHNICAL SPECIFICATIONS
Color/Finish
Stainless Steel
Glass Thickness
10 to 12 mm
Width
103 mm
Material
Stainless Steel 316
Type
Round
Usage
Sliding Door, Hinge Door, Commercial Door
Function
Offset Pull Handle
Screw/Nail
Included, M8
IMPORTANT INFORMATION
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware.
The customer cannot make any claims based on the use of these documents.
The company declines all responsibility in relation to structural details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always be sure to install the product correctly using the appropriate fixation for your material.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware.
The customer cannot make any claims based on the use of these documents.
The company declines all responsibility in relation to structural details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always be sure to install the product correctly using the appropriate fixation for your material.
DISCLAIMER
The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not absolve you of responsibility for checking the accuracy of data and the suitability of the product for your particular purpose.
The application, use or processing of our products as well as the execution of your projects based on our technical recommendations are beyond our control and are therefore exclusively your responsibility.
Sales of our products are subject to our most recent general sales conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products
The application, use or processing of our products as well as the execution of your projects based on our technical recommendations are beyond our control and are therefore exclusively your responsibility.
Sales of our products are subject to our most recent general sales conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products