Door Sweep with Single Soft Fin and Drip Rail

Product # 87S23012
Length of 2.2 linear meter

Drip rail for water management

The single fin is used to tide over the tile or the shower tray.
The 45° drip rail assists in deflecting water back into the enclosure.
Should be placed on the inside of the barrier.
Glass Thickness: 12 mm 10 mm Modify Options

TECHNICAL SPECIFICATIONS

Product #
87S23012
Finish
Clear
Length
2.2 m
Material
PVC

RELATED DOCUMENTS

IMPORTANT INFORMATION

PVC joints cannot be considered a total barrier against water damage and flooding. It is recommended to frequently inspect the product and pay particular attention to its use. It is recommended to replace the seals on a yearly basis.

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose.

The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.