Dap 33 Glazing

To add to cart, choose from the options below.

Can be painted

Dap 33 Glazing is the foremost name in glazing compounds. It's a long-lasting compound for face glazing wood and metal sash. Smooth and ready-mixed, Dap outlasts ordinary putty. It sticks tight to sash for air and watertight seals. Dap also stays flexible, resists cracking and allows for expansion and contraction. Formulated especially for face glazing on aluminum, steel or galvanized metal sash.
Finish: Off White White Volume: 300 ml 3.78 l Select Options
Product # Finish Volume
D015818 Off White 300 ml
D015816 Off White 3.78 l
D015815 White 237 ml
D015814 White 946 ml

ADVANTAGES AND BENEFITS

Glazing sticks tightly to glass to create a watertight and airtight joint.
Resists sagging, shrinking and cracking.
Can be used indoors or outdoors.
Enables a smooth application.

TECHNICAL SPECIFICATIONS

Product Type
Glazing Putty, Water base
Ideal Use
Aluminum Windows, Wood Windows
Optimal adherence to
Glass, Non-oiled Wood, Aluminum, Steel

IMPORTANT INFORMATION

For metal windows, sash corners must be sealed. All sashes must be safely installed and adjusted
prior to glazing and sufficiently rigid to permit normal operation without excessive bending or
flexing.

For wood sash applications, prime sash with an oil-based primer only and allow primer to dry.

When painting, use only a high-quality exterior-grade oil-based paint, or prime with a high-quality oil-based primer and topcoat with a high-quality exterior-grade acrylic-latex paint finish.

Sash should be operated carefully for approximately three weeks after applying the putty.

Temperature service range: -29 °C (-20.2 °F) to 71 °C (159.8 °F)
Temperature application range: 4.4 °C (39.92 °F) to 32.2 °C (89.96 °F)

Do not use on:
- plastic windowpanes
- porcelainized steel insulating panels
- insulated glass units with an organic seal
- stained or leaded glass
- any windowpane over 122 cm (48") in any run direction
- any metal sash with rabbets over 3 cm (1 1/4") wide
- composite or composition panels
- channel glazing
- any other surface not properly prepared