LEED document
Gutter Seal
To add to cart, choose from the options below.
Gutter Sealing Elastomeric Sealant
Gutter Seal is a one-part, high quality blend of synthetic rubber and resin. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions
TECHNICAL SPECIFICATIONS
Brand
Tremco
Ideal Use
Gutter, Threshold, Outside
Optimal adherence to
Aluminum, Painted metal
Tooling Time
5 to 10 minutes
Volume
300 ml
Weight
10.1 oz
Packaging Specifications
Cardboard Cartridge
SUGGESTED PRODUCTS
- Applicator Guns for Sealant, Caulking, and Glue Cartridges
- Skeleton Applicator Guns for Sealant Cartridge, Caulking, and Glue
APPLICATION
Basic Uses:
Gutter Seal has been specifically designed for use in gutter and rainwater applications and is ideally suited for metal-to-metal and metal-to-plastic joinery. Commonly found in and around the eavestrough.
Gutter Seal has been specifically designed for use in gutter and rainwater applications and is ideally suited for metal-to-metal and metal-to-plastic joinery. Commonly found in and around the eavestrough.
IMPORTANT INFORMATION
- Do not apply to damp or contaminated surfaces.
- Do not subject to more than 20% movement or expansion.
Gutter Seal is easy to apply with conventional caulking equipment. At 75 °F (23.9 °C), 50% RH, a durable skin will form within 30 minutes. Cut nozzle to desired bead size. The bead should not be thicker than 3/4" (18 mm).
Suggested maximum joint dimension: Rectangular = 3/4" x 3/8" (18 mm x 9 mm), Angular = 3/4"x 3/4" (18 mm x 18 mm).
Tooling is minimal if sealant is applied with adequate pressure.
Dry tooling is preferred.
Damaged sealant can be repaired. Consult your Tremco Distributor or Representative for repair procedures.
- Do not subject to more than 20% movement or expansion.
Gutter Seal is easy to apply with conventional caulking equipment. At 75 °F (23.9 °C), 50% RH, a durable skin will form within 30 minutes. Cut nozzle to desired bead size. The bead should not be thicker than 3/4" (18 mm).
Suggested maximum joint dimension: Rectangular = 3/4" x 3/8" (18 mm x 9 mm), Angular = 3/4"x 3/4" (18 mm x 18 mm).
Tooling is minimal if sealant is applied with adequate pressure.
Dry tooling is preferred.
Damaged sealant can be repaired. Consult your Tremco Distributor or Representative for repair procedures.