Datasheet
Dymonic® Sealant
Product # D012239
Ideal for dynamically moving joints
Dymonic® is a high performance, low modulus, one-component, moisture curing, modified polyurethane joint sealant.
It is specifically designed for sealing dynamically moving joints such as: expansion and control joints, precast concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking (windows, doors, panels, radon mitigation, bedding of mullions, frames, etc.).
Dymonic® exhibits tenacious adhesion which will not diminish over product life. This unique weather resistant formulation possesses a balanced adhesive strength, low modulus, and high recovery, making it ideal to withstand the following adverse conditions common to such installations: moisture, movement, shear, and deflection.
It is specifically designed for sealing dynamically moving joints such as: expansion and control joints, precast concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking (windows, doors, panels, radon mitigation, bedding of mullions, frames, etc.).
Dymonic® exhibits tenacious adhesion which will not diminish over product life. This unique weather resistant formulation possesses a balanced adhesive strength, low modulus, and high recovery, making it ideal to withstand the following adverse conditions common to such installations: moisture, movement, shear, and deflection.
ADVANTAGES AND BENEFITS
- Dymonic® demonstrates persistent adherence that does not degrade during its useful life
- Has a movement capability of ±25% of the original joint width
- Tenacious adhesion, which will not diminish over product life
- Has a movement capability of ±25% of the original joint width
- Tenacious adhesion, which will not diminish over product life
TECHNICAL SPECIFICATIONS
Product #
D012239
Brand
Tremco
Finish
Almond
Product Type
Polyurethane
Ideal Use
Aluminum Windows, Wood Windows, Vinyl (PVC) Windows, Exterior Trim & Siding, Curtain-Window Wall Systems, Outside
Base
Polyurethane
Optimal adherence to
Concrete, Brick, Aluminum, Stone
Volume
600 ml
Weight
20 oz
Properties
Paintable
Packaging Specifications
Sausage
Standards and Certifications
ULC, CFIA, ASTM C920, CAN/CGSB-19.13-M87
APPLICATION
DyMonic® is specifically for sealing dynamically moving joints such as expansion and control joints, precast concrete panel joints, tilt-up panel joints, curtain wall joints and perimeter caulking (window, doors, panels, radon mitigation, bedding of mullions and frames, etc.).
IMPORTANT INFORMATION
Cure Time:
Dymonic cures at a rate of about 1/16" per day at 70.
F and 50% relative humidity. Dymonic will skin within 24 hours and be tack-free in 3 days. The cure time can increase as the temperatures and/or humidity decrease. A good rule of thumb is one additional day of cure for every 10
F decrease in temperature.
Sealant Dimensions:
EXPANSION JOINTS - The minimum width and depth of any sealant application should be 1/4" by 1/4" (6 mm by 6 mm).
The depth (D) of sealant may be equal to the width (W) of joints that are less than 1/2" wide. For joints ranging from 1/2" to 1" (13 mm to 25 mm) wide, the sealant depth should be approximately one-half of the joint width.
The maximum depth (D) of any sealant application should be 1/2" (13 mm). For joints that are wider than 1" (25 mm) contact Tremco's Technical Service Department, or your local Tremco field representative.
WINDOW PERIMETERS -- For fillet beads, or angle beads around windows and doors, the sealant should exhibit a minimum surface contact area (C) of 1/4" onto each substrate.
Dymonic cures at a rate of about 1/16" per day at 70.
F and 50% relative humidity. Dymonic will skin within 24 hours and be tack-free in 3 days. The cure time can increase as the temperatures and/or humidity decrease. A good rule of thumb is one additional day of cure for every 10
F decrease in temperature.
Sealant Dimensions:
EXPANSION JOINTS - The minimum width and depth of any sealant application should be 1/4" by 1/4" (6 mm by 6 mm).
The depth (D) of sealant may be equal to the width (W) of joints that are less than 1/2" wide. For joints ranging from 1/2" to 1" (13 mm to 25 mm) wide, the sealant depth should be approximately one-half of the joint width.
The maximum depth (D) of any sealant application should be 1/2" (13 mm). For joints that are wider than 1" (25 mm) contact Tremco's Technical Service Department, or your local Tremco field representative.
WINDOW PERIMETERS -- For fillet beads, or angle beads around windows and doors, the sealant should exhibit a minimum surface contact area (C) of 1/4" onto each substrate.
