Line art
Overlay Glass Cabinet Hinge With Catch
Product # 757307140
Reversible
This glass door hinge is a smart choice to give a sleek, modern look to cabinets or showcases with its chrome finish.
Designed to be used on both left and right hand doors, as well as for glass panels ranging in thickness from 5 to 8mm.
Designed to be used on both left and right hand doors, as well as for glass panels ranging in thickness from 5 to 8mm.
ADVANTAGES AND BENEFITS
- Can be used with different glass thicknesses (5 mm to 8 mm)
- Suitable for showcases and cabinets with glass doors
- Reversible
- Suitable for showcases and cabinets with glass doors
- Reversible
TECHNICAL SPECIFICATIONS
Product #
757307140
Load Capacity
Max. 12 kg
Material
Zinc
Length
78 mm
Width
85 mm
Height
30 mm
Thickness of Glass
5 to 8 mm
Finish
Chrome
Width of Door to Respect
Max. 500 mm
Height of Door to Respect
Max. 1 200 mm
Use Type
Glass
Hinge Opening Angle
+150°
Brand
Sugatsune
APPLICATION
- For overlay use (10 mm)
- Installed on the inside of a cabinet
- Maximum glass door size per pair: 19-11/16" L x 47-1/4'' H (500 mm x 1200 mm)
- Maximum glass door weight per pair (including handles and locks): 26.5 lbs (12 kg)
- Applicable door thicknesses: 5 mm to 8 mm
- Glass cut out required for installation
- Installed on the inside of a cabinet
- Maximum glass door size per pair: 19-11/16" L x 47-1/4'' H (500 mm x 1200 mm)
- Maximum glass door weight per pair (including handles and locks): 26.5 lbs (12 kg)
- Applicable door thicknesses: 5 mm to 8 mm
- Glass cut out required for installation
INCLUDED PRODUCT(S)
- 1 hinge with latch
- 1 back plate
- 1 seal for the rear plate
- 1 seal
- 1 washer
- 2 Phillips round head screws
- 4 flat head wood screws (4.5 x 20)
- 1 safety label for finger protection
- 1 back plate
- 1 seal for the rear plate
- 1 seal
- 1 washer
- 2 Phillips round head screws
- 4 flat head wood screws (4.5 x 20)
- 1 safety label for finger protection
IMPORTANT INFORMATION
This illustration is provided for visual reference only. Actual product may differ from the illustration.
For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
Order hardware before starting the job.
The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel.
Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.
For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
Order hardware before starting the job.
The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel.
Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.
