Aerosol Spray Paint

To add to cart, choose from the options below.

fast-drying acrylic lacquer

MG Touch Up Spray Paint is a fast-drying acrylic lacquer which offers excellent adhesion, flexibility and cold check resistance. The finish is extremely hard and durable. In addition, it offers good resistance to detergent, water, abrasion, heat and alcohol.
Vehicle: Modified acrylic lacquer
Tack-free aerosol: 8 minutes
Recoat aerosol: 2 minutes or any time thereafter
Full cure: 24 hours to one week depending on the number of recoats, temperature and humidity. Full cure can be accelerated with heat. Full cure is complete when finish is odorless. Do not cure at temperatures above 65°C.
Recommended Film Thickness
Wet 3.9 to 5.6 mils (100 to 140 microns).
Dry 0.7 to 1.0 mils ( 18 to 25 microns).
Finish: Bright Polished White Brown Matte Curtain Clear Anodized Aluminum Sandalwood Qu-Coat Matt Select Options
Product # Finish
D010307 Bright Polished White
D010306 Brown Matte Curtain
D010301 Clear Anodized Aluminum
D010302 Sandalwood Qu-Coat Matt

TECHNICAL SPECIFICATIONS

Material
Modified Acrylic Lacquer

APPLICATION

Surface Preparation

All surfaces must be clean and dry as well as free of dust, grease, oil, etc. If you are touching up or spraying over conventional finishes, test for compatibility. Product is most suitable for touching up baked finishes or UV-cured finished surfaces.

IMPORTANT INFORMATION

Special Instructions

It is recommended that the customer test this product before use.

Directions

Aerosols: Shake can well before using. Spray with an even sweeping motion 6 to 10 inches (15-25 cm) from surface. Apply 2 or 3 coats as desired, waiting approximately 2 minutes between coats. For best results apply at room temperature (21°C). High temperature and high humidity can cause surface blushing.